Oberon 1041-00 Uživatelský manuál stáhnout pdf

Installation Instructions

Model Number 1041-00

(877) 867-2312 • www.oberonwireless.com

P/N 1751 – Rev. 4 Oberon, Inc. •

••

• 1315 South Allen Street •

••

Model 1041-00 Concealed Spline Ceiling Mount Assembly Components:

- 1041-00 Ceiling Mount – 1 each

- #8-32 x 3/8" Screws – 4 each

- Eye Bolts – 2 each

- Cable Clamp - 1 each

- Installation Instructions – 1 each

If any of these items are missing, contact your Oberon representative.

Step 1 – Un-package the 1041-00 unit

and place it on a flat work surface.

Step 2 - Disassemble the unit by

removing the four (4) screws on the

galvanized back panel and placing them

in a location where they will be available

when reassembling the unit.

Step 3 - Install the cable clamp through

the 7/8" diameter hole in the galvanized

back panel. Install the cable clamp so that

the two adjustment screws are located on

the outside of the box (ref. Figure 1).

Page 2

Step 4 - Attach the Cisco mounting

plate to the galvanized back panel

using four (4) #8-32 x 3/8" screws.

For Cisco "AIR-BRACKET-1" (shown

in Figure 2)), use the outer hole

pattern, for Cisco "AIR-BRACKET-2",

use the inner hole pattern.

Step 5 - For ease of installation, you

may elect to use a surface mount

receptacle (a.k.a. a "Biscuit" jack) on

the back of the galvanized panel. If

using a surface mount receptacle,

attach the receptacle to the back side of the

enclosure and run a jumper through the cable

clamp, prior to installing the Cisco AP. If attaching

the Ethernet cable directly, you will need to move to

the location where the enclosure is to be installed

and run the cable from the ceiling through cable jack

before continuing.

Step 6 - Attach the Ethernet cable to the Cisco

access point and mount the access point to the

Cisco mounting plate (ref. Figure 3).

Page 3

Figure 1: Installation of Cable Clamp

Figure 2: Installation of Cisco Mounting Plate

Figure 3: Installation of Cisco Access Point

1 2

Shrnutí obsahu

Strany 1 - Installation Instructions

Installation Instructions Model Number 1041-00 (877) 867-2312 • www.oberonwireless.com P/N 1751 – Rev. 4 Oberon, Inc. •••• 1315 South Allen S

Strany 2 - **** WARNING ****

Step 7 – Install the painted front panel to the assembly by re-installing the four (4) screws you previously removed (ref. Figure 4). S

Komentáře k této Příručce

Žádné komentáře

Oberon 1041-00 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství komunikace Oberon 1041-00. Oberon 1041-00 User Manual [de] [en] [it] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství komunikace Oberon 1041-00